adorne® 0-10V Touch™ Dimmer
ADTH4FBL3PM4 adorne Collection
Touch™ Dimmer, 0-10V, Magnesium is rated out of 5 by 1.
Perfect anywhere you'd like to turn lights on and off with the simplest touch, while also enjoying the ability to dim. Featuring a translucent glass-like face for a modern feel, control your light by simply pressing a finger to the center circle to turn lights on/off, or use the arrows on the side to dim. Use the device on its own to control a light or fixture from a single location, or pair with a 3-way switch to control a single light source from two locations. Pair with the matching Touch Switch for a consistent control-style throughout a room, or your entire house. Made exclusively for use with screwless Wall Plates from the adorne® Collection, sold separately.
Added to Your Shopping Cart
- Installs in 15 minutes or less, fitting into an existing electrical box. No new wiring required for typical installation.
- For use with 0-10V bulbs, and features intuitive touch control for turning on/off, and adjusting light levels.
- More color options available to fit any style, including finishes to match current hardware and lighting trends.
- Complete the look with a stunning, screwless adorne® Wall Plate, not included. Available in a range of contemporary colors and finishes. Coordinate with other designer switches & outlets.
|Countries Of Origin||China|
|Product Line||Pass & Seymour|
Guide Form Specifications
10 Tips for Your DIY Designer Switches & Outlets Projectpdf 0kb
Cleaning Instructions for Wiring Devicespdf
Meet Your Matchpdf 4kb
adorne Collection Dimmer Compatibility Chartpdf 0kb
adorne Limited Lifetime Warrantypdf 0kb
adorne Product Comparison Chartpdf 0kb
adorne Room Planner Checklistpdf 0kb
Rated 5 out of 5 by Leah from So happy with our purchase I’m so glad I found Legrand products. We love our touch dimmer. It was easy to install and is super stylish. We can’t wait to replace all our switches and plugs with the adorne line.
Date published: 2020-09-11
What is the minimum load of this dimmer? It switches an indirect (strip) LED on and off but does not dim it up or down.
The ADTH703TUW4 minimum load requirements are: Min. load rating: • Incandescent: 20W • MLV: 20VA • ELV: 20W • EFL: .08A • CFL and LED: 6W I would make sure that the LED's are "dimmable"
Date published: 2020-02-10
My 0-10v when hooked up will come on but can not shut off or dim, face does not light up and it is grounded
Make sure You Have a Hot wire going into the terminal labled Hot. A neutral wire in the terminal labled White. The load wire in the terminal labled Load. And connect Your Violet and Gray wires to the Violet and Gray wires on Your 0-10 volt dimming ballast. Feel free to contact tech support at 1800 223 4185 option 1
Date published: 2019-11-15
I'm installed 3 touch dimmer but it's not working What is the reason that any dimmer work?
Thank you for your inquiry regarding our Touch 0-10 V dimmer. Is the device snapped into the bracket? If it is not snapped in to the grounded bracket, the device will not function. Additionally, this is a 0-10 V dimmer so it needs to be connected to a 0-10 V dimming ballast. If that is not the type of install you have, you may need a different dimmer. Feel free to contact us via phone at 800-223-4185 or email at firstname.lastname@example.org. Hope this helps!
Date published: 2018-04-16
You may also like...
AAAL1G4 | Legrand
The Accent Nightlight is a stunning addition to any adorne product. It provides a wash of light below the wall plate, acting as a nightlight or as an accent light.
ASPD1532W4 | Legrand
The Paddle Switch features a simple up and down motion, allowing you to turns lights on and off with ease.
AWC1G2SN4 | Legrand
This cast metal plate pairs perfectly with your satin nickel fixtures and cabinet hardware. The sleek metal design is ideal for both contemporary and traditional homes.