radiant® 0-10V LED/Fluorescent Dimmer
RH4FBL3PW radiant Collection
0-10V LED/Fluorescent Dimmer, White is rated out of 5 by 1.
Upgrade your space with precise dimming control and exceptional style. The radiant® 0-10V Dimmer works with low-voltage fluorescent and LED fixtures, allowing you to set the perfect light level for your space with efficiency and ease. Part of the radiant® Collection, it also features clean lines and smooth control for a sophisticated touch. Made exclusively for use with screwless Wall Plates from the radiant® Collection, sold separately.
Added to Your Shopping Cart
- Replaces any basic switch or dimmer with ease, in both single-pole and 3-way applications. For use with 0-10V, 4-wire, 120V 10A/277V 5A LED and fluorescent lighting.
- Low-profile paddle switch offers smoother On/Off control, while a separate, ergonomic slider allows you to adjust light levels with precision.
- Locator light illuminates when switch is off, emitting a soft glow to help you find it in the dark.
- Constant memory features returns lights to their previous level after a power failure or outage.
- No derating* required for 2-gang applications. *Reducing the maximum wattage a dimmer can handle. This is sometimes required for multi-gang applications.
- Features durable, high-impact resistant thermoplastic construction.
- More color options available to fit any style, including finishes to match current hardware and lighting trends.
- Complete the look with a sleek, screwless radiant® Wall Plate, and coordinate with other designer switches and outlets available from the radiant® Collection.
|Countries Of Origin||China|
|Product Line||Pass & Seymour|
|Standard||CSA Listed, cULus, UL Listed|
Listing Agencies / 3rd Party Agencies
|Frequency Rating||120VAC 60Hz Hz|
|Environmental Conditions||Humidity: Less than 95% non condensing|
Rated 5 out of 5 by OldEngineer from This is a great dimmer at a good price I just purchased and installed this 0-10v dimmer for a light my wife wanted that was only dimmable via 0-10v dimming. The best feature of this dimmer is that the "Constant memory returns lights to previous level after a power failure". It is very easy to connect and comes with covers for two additional covers in addition to the white. I bought it at a local electrical supply house and it was very cost effective compared to buying one online. I hope it is reliable, it will get a lot of use. Curiously Legrand products did not show up in internet searches for 0-10v dimmers.
Date published: 2019-02-07
Can multiple dimmers be used to dim the same group of lights as in a 3-way or 4-way setup? If not, are there companion dimmers to allow for this application or is this not possible with this product? Thanks.
The RH4FBL3P dimmer would need to be used with a standard 3way switch and you can only dim from the one location. Typically, you would need a master dimmer and remote dimmer for that type of application and we do not have them for 0-10V drivers.
Date published: 2020-11-30
CAN THIS HANDLE #3 PATRIOTLIGHTINA 2X2 LED FLAT PANELS 1 SWITCH
If the panels are run by a 0-10V dimming ballast/driver this dimmer will work.
Date published: 2020-11-21
I purchased the RNCL453PTCCCV6 dimmer from Lowes. It does not dim our shutoff the Innovation Lighting BB-60-LED-ST64 bulb. The dimmer packaging does not state anything about 3.5 watt bulbs or 0-10V incompatibility.
This dimmer is compatible with CFL/LED dimmable bulbs (except 0-10V LED drivers) and has a 10W minimum load required. If you have 0-10V fixture, you would need to use the RH4FBL3PTC(4 wire) dimmer.
Date published: 2020-04-03
Can the switch be used to dim only 3 of 5 lights installed on the switch?
These are generally all on one 0-10V driver/ballast, so they would all be dimmed the same.
Date published: 2020-03-26
For a single pole installation, does the switch require 4 wires from the switch to the fixture? I only have a 3 wire in the wall from the switch location to the fixture.
The Radiant 0-10V dimmer is designed for use with a "4 wire" dimming ballast only.
Date published: 2020-03-11
I have a RH4FBL3PTCCCV6 dimmer and a Lithonia led troffer light MVOLT 120-277v how to iI wire this
If the Lithonia led troffer light MVOLT is a 0-10V(4 wire) fixture, then follow the wiring instructions on the attached link for installing the Radiant dimmer. https://www.legrand.us/-/media/brands/radiant/resources/installation-instructions/radiant%20flourescent_led%20dimmers-10a.ashx If the Lithonia led troffer light MVOLT LED driver does not have Grey and Purple low voltage wires, then you would need a different dimmer for it(most likely the RH703PTUTC).
Date published: 2019-10-25
Will the dimmer dim all the way down to darkness?
This is a 0-10v Dimmer. Dimming results will be vary depending on the dimming ballast and lighting fixture. Our 0-10V dimmer is designed to dim the full range of the Lights
Date published: 2020-01-01
Does it require a screwless switch plate?
Good Morning, This dimmer will work with any wallplate that has a decorator style opening on it. It doesn't have to be one of our screwless ones. Hope this helps!
Date published: 2019-04-10
You may also like...
LC2101-WH | Legrand
LC2103-WH | Legrand
RH703PTUW | Legrand
More color options available. Works with any 120V dimmable lamp, load and fixture.