Discontinued - 15A/125V Plug-in Adapter, 2 Pole, 2 Wire, Brown

Please reach out to the Tech Services team at technical.support-CAB@legrand.us.

Cablofil recommends wire mesh cable tray be supported on 5'-8' spans.

Yes. This is a blind end with a black powder coat finish for Cablofil's 4" x 18" wire mesh tray.

Cable tray does not have voltage ratings. This tray rated cable can be installed in any cable tray.

The spacing between expansion splices is determined from the temperature differential and straight tray footage between bends. NEMA VE2/NEMA BI50016 standards publish a table used to determine this spacing. As an example, for a temperature differential of 25 degrees Fahrenheit, expansion splices should be used with wire mesh cable tray every 512 feet between bends. It is rare that expansion comes into play with wire mesh cable tray. For additional information, please reach out to Cablofil tech support at technical.support-CAB@legrand.us

I would say you are correct. On page 18 of the Legrand Installation Guide, shows 9 cuts are needed for a sweep 90 on an 18" wide cable tray.

Cable fill tables can be found on Cablofil's catalog page A.7. There is also a cable fill sizing tool that can be downloaded from https://www.legrand.us/tools.

Yes. Add the suffix PE, CF105/150PE. When you submit the quotation request to your local sales rep or distributor, add a note that PE = yellow.