text.skipToContent text.skipToNavigation

Discontinued - Heavy Duty Momentary Toggle Switch, White

1250-W Pass and Seymour

Send
Save as PDF
Added to Favorites Go to favorites

Remove from favorites?

Something went wrong. Please try again later.

Features

Collection consolidated to white & grey options
Oversize silver alloy contacts for long life and better heat dissipation.
Side wired terminals accept #14 - #10 AWG copper or copper-clad conductors.
Fiber terminal insulation barriers standard.
Can be mounted in standard device boxes or in NEMA 1 sheet steel enclosures.
Bodies, covers, and toggles molded of durable nylon.
Single Pole-Double Throw and Double Pole-Double Throw.
Locking Switches supplied with one 1498-NT key.
Normally open.
For covering patents, see www.legrand.us/patents.
For compatible wall plate options, from our TradeMaster unbreakable plates to our radiant screwless plates to our metal wall plates, click here.

Specifications

General Info

Color	White
Product Line	Wattstopper
Country Of Origin	China
UPC Number	754182125142

Technical Information

Amperage

15 A

Resources

Cutsheet

1250-W Cutsheet

pdf

Reviews

Questions & Answers

can this dim 0-10 volt drivers or is it just adjusting sensor to preset hi and low trim levels. I need to be able to dim from 100 down to about 5% if needed.

Asked by: mike

Hello, The FS-205 occupancy sensors turn lighting ON and OFF based on occupancy and ambient light levels. It does not have continues dimming

Answered by: Justin

Date published: 2025-01-03

UDO18KITEZ Can you please confirm for the MPN#UDO18KITEZ both the screw and bolt are ordered or separately.

Asked by: MUKESH

The UDO dropout design includes a bend tab for securement to Cablofil wire mesh side wires. No field cutting or additional hardware is required.

Answered by: Cablofil Tech Support

Date published: 2024-05-30

Can this be used with a power pack? Esentially used like an LVSW-101 switch.

Asked by: Cplunkett27

This switch is now also rated and for tested to 3 Amps, 24Vdc rating.

Answered by: Legrand Technical Support

Date published: 2023-06-01

Can I get a wiring diagram for this switch please.

Asked by: Anonymous

The wiring guide for the 1250L switch is attached below.

Answered by: Legrand Technical Support

Date published: 2024-11-05

Where is this product manufacturered?

Asked by: Agent007

The Cablobend is manufactured in the United States

Answered by: bobc

Date published: 2022-10-15

Is the 1250 have maintained contacts or momentary?

Asked by: Tom@nrarep

The 1250 switch is a SP/DT Momentary contact switch.

Answered by: Legrand Technical Support

Date published: 2021-02-25

can this be used with 24 volts sensor and power pack?

Asked by: CHARLES

The motor control switch can be used to control ON/OFF power to the power pack.

Answered by: Legrand Technical Support

Date published: 2022-05-19

where do you connect ground wire

Asked by: Sid E

The Manual Controller switch, 3 position - center off(1250) does not require a GROUND connection.

Answered by: Legrand Technical Support

Date published: 2019-01-31

15A Single Pole, Double Throw Switch Questions - page 2