text.skipToContent text.skipToNavigation
  1. Home
  2. Lighting Controls and Systems
  3. Daylight Sensors
  4. Indoor Photosensors

Daylighting Sensor, 0 -10 VDC dimming ballasts, White

LS-301 Wattstopper

The LightSaver LS-301 is a closed loop, ceiling mount, low voltage indoor photosensor that works with standard, 0–10 VDC electronic dimming ballasts or compatible LED drivers to dim lighting as daylight increases
Where To Buy
  • Send
  • Save as PDF
  • Add to favorites Remove from favorites

Features

  • Provides precise control of lighting to maintain desired light level
  • Extremely linear photocell response with greater than 1% accuracy
  • Designed to measure light as the human eye perceives it, eliminating ““overreporting”” illumination levels provided by daylight
  • California Title 24-2013 compliant
  • Separate handheld remote controls for setup and occupant adjustment to prevent tampering
  • Boosts energy savings by reducing maximum lamp output, often resulting in a 20% reduction or more compared with lights at full output
  • Achieves lumen maintenance by holding target light level as lamp output decreases over time
Back to Top