DLM Wireless Open Loop Photosensor, Single or Multi-Zone
LMDL-600
Wattstopper
Bazaarvoice SAP Hybris Integration Version 2.8.1
The LMDL-600 is a wireless open loop photo sensor that measures the daylight contribution in order to automatically switch or dim multiple zones of lighting. It is part of the wireless Digital Lighting Management (DLM) system and sends light level signals to control loads connected to DLM on/off or dimming room controllers.
- Send
- Save as PDF
-
Added to Favorites Go to favoritesRemove from favorites?Something went wrong. Please try again later.
Features
- Daylight responsive on/off and dimming control for up to three lighting zones
- Dual IPv6 Wireless and Bluetooth® low energy antennas provide robust signal strength and reliable communication
- 60 degree spatial response for optimal detection of ambient light level
- Uses IPv6 wireless to establish network communication with DLM wireless devices
- Quick and easy wireless installation – no Cat 5e connection needed
- Up to 10-year battery life; battery level can be viewed with wireless DLM software
- Calibration using DLM Configuration App
Specifications
General Info
| Color | White | ||
| Product Series | LMDL | ||
| Type | Sensor | ||
| Finish | Matte | ||
| Application Sector | Commercial | ||
| Product Line | Wattstopper | ||
| Country Of Origin | China | ||
| Features | Multi Zone, Single Zone | ||
| Included | Battery | ||
| Installation Location | Ceiling | ||
| Warranty Type | 5-Year | ||
| Standard | UL, FCC part 15, RoHS | ||
| UPC Number | 754182942893 |
Dimensions
| Product Depth US | 1.3 in | ||
| Product Height US | 2.7 in | ||
| Product Volume US | 11.7 cu in | ||
| Product Width US | 3.0 in | ||
| Product Weight US | 0.2 lb |
Additional Information
| RoHS Compliant | Yes | This product meets the material restrictions of Article 4 of the RoHS Directive (2011/65/EU), including Commission Delegated Directive 2015/863. |
Technical Information
| Antenna | Integrated, Internal | ||
| Antenna Pattern | Omni-directional | ||
| Battery | CR123A 3V | ||
| Battery Capacity | 1500 mAh | ||
| Battery Life | Up to 10 Years | ||
| Topology | Wireless Mesh | ||
| Compatibility | DLM Wireless (IPv6), LMDL-600-RPM | ||
| Control Algorithm | Open Loop | ||
| Encryption | AES 128-bit | ||
| Frequency Band | 2.4 GHz | ||
| Has Battery | Yes | ||
| Indoor/Outdoor | Indoor | ||
| Input Voltage | 3 VDC | ||
| Mounting Type | Surface, Threaded Rod | ||
| Operating Temperature | 0°-40°C, 32°-104°F | ||
| Operating Temperature Max | 40 °C | ||
| Operating Temperature Min | 0 °C | ||
| Operating Humidity | 5-95% RH (Non-Condensing) | ||
| Sensing Range | 1-1500 fc | ||
| Sensor Type | Daylight | ||
| Sensor Technology | Photosensor | ||
| Sensor Coverage Pattern | 60 deg | ||
| Storage Temperature | 23° - 140° F, -5° - 60° C | ||
| Wireless Range | Bluetooth, up to 30 ft, IPv6 6LoWPAN, up to 60 ft |
Resources
Cutsheet
Installation Instructions
CAD Drawings
Reviews
Bazaarvoice SAP Hybris Integration Version 2.8.1
Questions & Answers
Can we use this sensor to control DLM shades so that as certain fc levels are registered the shades can move to a specific level? If using in conjunction with the astronomical clock function of the controller, can the sensor override the controller?
The DLM Shading system cannot be controlled by sensor commands at this time. This may be updated soon with further firmware upgrades in the future.
Date published: 2024-01-19
Bazaarvoice SAP Hybris Integration Version 2.8.1