DLM Room Controller, 1 Relay, KO, 0-10v, 10A, Metered
LMRC-111-M
Wattstopper
Bazaarvoice SAP Hybris Integration Version 2.8.1
LMRC-110 series room controllers include one or two relay(s) to switch a total of 10 amps, a high-efficiency switching power supply and dual 0-10 volt outputs per relay for control of dimmable loads including compatible LED drivers or electronic ballasts. They are the foundation of a Digital Lighting Management (DLM) system, and allow integration of occupancy sensors, daylighting controls and switches for energy-efficient control.
- Send
- Save as PDF
-
Added to Favorites Go to favoritesRemove from favorites?Something went wrong. Please try again later.
Features
- Plenum-rated controllers with line voltage relay(s) and 0-10 volt dimming output(s)
- Knockout mounting for easy installation; Class 1 and/or Class 2 connection for 0-10V wiring
- Available with or without metering (+/- 2% accuracy)
- Plug n’ Go™ automatic configuration for quick installation and maximum energy efficiency
- Store 16 scene preset levels for each load
- Support energy saving manual-on, partial-on and dimming control strategies
Specifications
General Info
| Color | White | ||
| Product Series | LMRC | ||
| Type | Room Controller | ||
| Application Sector | Commercial | ||
| Product Line | Wattstopper | ||
| Country Of Origin | China | ||
| Features | Metered | ||
| Installation Location | Ceiling | ||
| Warranty Type | 5-Year | ||
| Standard | UL 924, UL 60730, UL 2043, cUL, FCC part 15, PEP, RoHS 2011/65/EC, ISO 14025:2010, ISO 14001 | ||
| UPC Number | 754182939121 |
Dimensions
| Product Depth US | 2.0 in | ||
| Product Height US | 4.4 in | ||
| Product Volume US | 44.6 cu in | ||
| Product Width US | 3.9 in | ||
| Product Weight US | 0.6 lb |
Additional Information
| RoHS Compliant | Yes | This product meets the material restrictions of Article 4 of the RoHS Directive (2011/65/EU), including Commission Delegated Directive 2015/863. |
Technical Information
| Current Draw | 10 A | ||
| Number of Connections | 4 | ||
| Topology | Free Topology | ||
| Connector Type | RJ-45, Terminal Block | ||
| Dimming Compatibility | 0-10 V | ||
| Indoor/Outdoor | Indoor | ||
| Input Voltage | 120/277 VAC | ||
| Line Frequency | 50 Hz, 60 Hz | ||
| Mounting Type | 1/2 in Knockout, 4 in Deep J-Box | ||
| Number of Relays | 1 | ||
| Operating Temperature | 0°-55°C, 32°-131°F | ||
| Operating Temperature Max | 131 °F | ||
| Operating Temperature Min | 32 °F | ||
| Operating Humidity | 5-95% RH (Non-Condensing) | ||
| Output Voltage | 24 VDC |
Resources
Installation Instructions
CAD Drawings
Supporting Document
Reviews
Bazaarvoice SAP Hybris Integration Version 2.8.1
Questions & Answers
I have a LMRC-111 RC and a LMSW-103 switch. One load and no Occ sensor. how do I get the dimming control to work.
The default operation of your switch is to toggle the lights on and off with a button press. To enable dimming control, the buttons need to be reconfigured. This can be done using the LMCT-100-2 Configuration Remote or a laptop with LMCS DLM Software and an LMCI-100 interface.
For step-by-step guidance on reprogramming your switch for dimming functionality, we recommend reaching out to Wattstopper Technical Support, where an expert can assist you with the process using one of the methods mentioned.
Date published: 2025-02-21
Hi Is this the same as a lmrc-111-m ?
Yes, this is a Wattstopper LMRC-111-M.
Date published: 2024-01-22
Can a lmrc 111 control 277 lighting and a 120v recepticle?
Bazaarvoice SAP Hybris Integration Version 2.8.1