text.skipToContent text.skipToNavigation

Front of two button Low Voltage Wall Switch w/LED, White

Front of four button Low Voltage Wall Switch w/LED, White

Front of Low Voltage Wall Switch, 1-Button w/LED, White

Front of two button of Low Voltage Wall Switch w/LED, Light almond

Front of two button Low Voltage Wall Switch w/LED, White with no cover plate

Front of three button Low Voltage Wall Switch, 1-Button w/LED, White with cover plate

Front of four button of Low Voltage Wall Switch, 1-Button w/LED, White with cover plate

Front of eight button Low Voltage Wall Switch, 1-Button w/LED, White with no plate cover

Front of two button Low Voltage Wall Switch, 1-Button w/LED, White with plate

Front of Low Voltage Wall Switch, 3-Button w/LED, White with no plate

Low Voltage Switch, 2-Button w/LED, White

LVSW-102-W Wattstopper

LVSW-100 Series Low Voltage Switches are lighting control devices that use conventional point-to-point low voltage wiring for control of single or multiple loads. Each button provides a momentary contact that is intended for use with compatible low voltage relay panels or similar lighting control panels or devices. Each button has an LED indicator that can serve as a status indicator or as a locator light.

Color White

Send
Save as PDF
Added to Favorites Go to favorites

Remove from favorites?

Something went wrong. Please try again later.

Features

Low voltage pushbutton switches for on/off control of one or more loads
Compatible with LC8, LP8, LI and LMCP Series lighting control panels
LED pilot light on each button
Customizable, field replaceable buttons
Single gang devices, compatible with standard decorator style face plates
Appearance matches DLM LMSW-100 Series digital wall switches

Specifications

General Info

Product Line	Wattstopper
Color	White
UPC Number	754182931354
Country Of Origin	China
Type	Switch

Dimensions

Product Width US	1.8 in
Product Weight US	0.2 lb
Product Volume US	20.3 cu in
Product Depth US	1.6 in
Product Height US	4.1 in

Additional Information

RoHS Compliant	Yes	This product meets the material restrictions of Article 4 of the RoHS Directive (2011/65/EU), including Commission Delegated Directive 2015/863.
DesignLights Consortium Qualified System	Yes
Security	Yes	This product is ioXt certified

Technical Information

Seismic Tested	No
Number of Gangs	1
Number of Buttons	2
Amperage	2 mA
Indoor/Outdoor	Indoor

Resources

If one button stop cutting light on what's wrong with it

Asked by: Cedric 74

If one of the buttons on the LVSW-102 stops turning on the light, there could be several potential issues: 1. Wiring Issue: A loose or damaged wire connection could prevent the button from functioning. 2. Button Malfunction: The button may be defective or worn out. 3. Relay Panel Issue: The associated relay panel might be malfunctioning or not receiving the signal. 4. Power Supply: There could be an issue with the low-voltage power supply. Checking these components should help identify the problem.