text.skipToContent text.skipToNavigation

Wireless Commissioning Tool for Fixture Mount Sensors

The FSIR-100 Wireless IR Configuration Tool is a handheld tool for remote configuration of IR-enabled fixture integrated sensors. The tool enables device modifications via pushbutton, without ladders or tools, and stores up to six sensor parameter profiles to speed configuration of multiple sensors.

Send
Save as PDF
Added to Favorites Go to favorites

Remove from favorites?

Something went wrong. Please try again later.

Features

Enables fast ladder-free setup and maintenance
Easy-to-read OLED screen
Allows precise configuration with greater granularity than dip switches or trimpots
2-way IR communication for data upload, download, confirmation and storage
Easy-to-use navigation pad
Configures IR-enabled fixture sensors including selected HBP and FSP models

Specifications

General Info

Product Line	Wattstopper
Color	Black
UPC Number	754182931224
Country Of Origin	China
Product Series	FSIR
Warranty Type	5-Year
Type	Configuration Tool

Dimensions

Product Width US	2.5 in
Product Weight US	0.2 lb
Product Volume US	8.4 cu in
Product Depth US	0.8 in
Product Height US	4.2 in

Additional Information

RoHS Compliant	Yes	This product meets the material restrictions of Article 4 of the RoHS Directive (2011/65/EU), including Commission Delegated Directive 2015/863.
DesignLights Consortium Qualified System	Yes
Security	Yes	This product is ioXt certified

Technical Information

Indoor/Outdoor	Indoor
Sensing Range	Up to 32 ft

Resources

Cutsheet

FSIR-100 Wireless Handheld Configuration Tool

pdf

User Guides

FSIR-100 Wireless Handheld Configuration Tool User Guide

pdf

Reviews

Questions & Answers

Hi. What settings do I have to input to keep lights off at night and on during the day?

Asked by: WTP

If you have a LMZC Zone Controller or LMCP Panel you would enter the schedule under panel programming. If you do not have one of those devices a schedule cannot be entered without additional devices.

Answered by: Justin

Date published: 2024-12-10

The lights go on/off throughout the night. from full bright to off. No motion activating them. Light on the sensor is flashing 3 times The setting: High Mode 10 Low mode 4 Time out 30 min Cut off DIS Sensitivity MAX, Setpoint 10, Ramp up 1 down 4s PC 25

Asked by: Shane

Greetings Shane, I would also disable the set-point this may be the setting causing it to go on and off throughout the night. High mode: 10v low mode: 4v time delay: 30min cut off: disable sensitivity: max setpoint: disabled ramp up/down: disabled photocell: 30fc If any questions, give us a call at 1-800-879-8585 opt. 3 for Technical support

Answered by: Justin

Date published: 2024-11-04

Hello! How do I program to disable the motion sensor but still allow the light fixture to turn on at night via the photocell?

Asked by: Branson

Please try the following settings for on/off photocell only : High Mode: 10 Low Mode: 9.8 Time Delay: 30m Cut Off: DIS Sensitivity: L Setpoint: DIS Fade Up: DIS Fade Down: DIS Photocell on/off: 30 If you have any questions, please contact Wattstopper Technical Support@ 800-87-8585

Answered by: Justin

Date published: 2024-10-04

Also, in order to dim the lights, do I need a dimmer switch installed to the wall?

Asked by: Anonymous

Hi, You can set the fixtured to a fixed dim level by setting the high level to 5(50%) and the low level to 4.8%(48%) Please refer to the user guide available on the product page or reach out to tech support for more assistance. Legrand Technical Support: Phone: 1 800-879-8585, Option 3 then Option 1 Mon - Fri: 7am - 7pm CST (excluding holidays)