text.skipToContent text.skipToNavigation
  1. Home
  2. Lighting Controls and Systems
  3. Occupancy and Vacancy Sensors
  4. Wall Switch Occupancy and Vacancy Sensors
Front of PIR Wall Switch Occupancy Sensor, White

PIR Wall Switch Occupancy Sensor, 120/277V, Red

PW-301-R Wattstopper
  • bvseo_sdk, java_sdk, bvseo-4.0.0
  • CLOUD, getAggregateRating, 24ms
  • REVIEWS, PRODUCT
  • bvseo-msg: The resource to the URL or file is currently unavailable.;

The PW-301 passive infrared (PIR) wall switch sensor can turn lights OFF and ON based on occupancy. It is characterized by high sensitivity to small and large movements, appealing aesthetics, and a variety of features.
Color Red
BAA No
Voltage 120/277 VAC
Where To Buy
  • Send
  • Save as PDF
  • Add to favorites Remove from favorites
Features

Features

  • High sensitivity and dense coverage for exceptional performance
  • Defaults to Manual-ON operation for maximum energy savings
  • Color-matched lens and low profile for appealing design
  • Optional neutral connection with break off tab to expose neutral terminals
  • 120/240/277 VAC and 347 VAC models
  • Allows multi-way control from one of up to four control locations
Specifications

Specifications

General Info
Product Line Wattstopper
Color Red
UPC Number 754182935253
Country Of Origin China
Product Series PW-300
Features Adjustable Time Delay, Indicator Lights, Light Level Sensor, Sensitivity Adjustment, Vandal Resistant Lens
Switch Type Motion Sensor
Installation Location Wall
Included Sensor Mask
Application Sector Commercial
Standard UL, cUL
Warranty Type 5-Year
Type Sensor, Switch
Dimensions
Product Width US 1.75 in
Product Weight US 0.3 lb
Product Volume US 35.1 cu in
Product Depth US 1.81 in
Product Height US 4.1 in
Additional Information
RoHS Compliant Yes This product meets the material restrictions of Article 4 of the RoHS Directive (2011/65/EU), including Commission Delegated Directive 2015/863.
DesignLights Consortium Qualified System Yes
Security   Yes This product is ioXt certified
Technical Information
Has Battery No
Number of Connections 5
Sensor Coverage Pattern 180 deg
Sensor Type Occupancy
Sensor Mounting Height 4 ft
Number of Buttons 1
Amperage 4.3 A
Number of Rockers 0
Sensor Technology Passive Infrared (PIR)
Input Voltage 120/240/277 VAC
Requires Neutral Wire No
Line Frequency 50 Hz, 60 Hz
Wattage 1200 W
Mounting Type In-Wall
On Function Selectable Auto/Manual
Sensing Range Major motion 35 x 30 ft,Minor motion 20 x 15 ft
Wire Connection Type Flying Leads
Load 1000W
Resources
Reviews

Reviews

  • bvseo_sdk, java_sdk, bvseo-4.0.0
  • CLOUD, getReviews, 3ms
  • REVIEWS, PRODUCT
  • bvseo-msg: The resource to the URL or file is currently unavailable.;
Questions & Answers

Questions & Answers

Wiring diagram for 3 sensors.

Asked by: Jared Cattooo
You can include up to 4 PW-301's in a multi-way configuration. Simply add switches to the wiring diagram shown in the installation instructions which can be found at the following URL: https://www.legrand.us/lighting-controls-and-systems/occupancy-and-vacancy-sensors/wall-switch-occupancy-and-vacancy-sensors/pir-wall-switch-occupancy-sensor-white/p/pw-301-w The additional switches would be added in a similar fashion to the leftmost switcch in the wiring diagram, with the load wires capped off on all but one of the switches, which is connected to the load.
Answered by: Tier 1 Tech Support
Date published: 2024-03-28

can a PW-301 replace a PW-101.

Asked by: Anonymous
Yes, the PW-301 is the direct replacement for the PW-101.
Answered by: Justin
Date published: 2024-01-31

Cam switches be wire in parallel with other oc sensors and power packs

Asked by: Jamie
Jamie, The Wattstopper Low voltage versions can, i.e. DW-100-24 sensor switch can be wired in parallel to a DT-300 ceiling sensor.
Answered by: Justin
Date published: 2024-01-25

Is a PW-301 suitable for a 3 way application?

Asked by: Anonymous
Hello, The PW301 supports Multi-Way capability. Sensors can easily be wired together for convenient control of a common load. When wiring this way, only use 300 series sensors. Multi-Way in 300 series is not compatible with prior sensor models. Best Regards, Technical Support
Answered by: Justin
Date published: 2023-05-02

How to set tip switch to 30min. and turn lights on and off when you walk in to the room?

Asked by: Sione Ngaluafe
Hi Sione, Please see chart below for dipswitch settings for your sensor. 30 mins = 1/2/3 on/on/off and 8/9 both off to enable auto on feature.
Answered by: Tier 1 Tech Support
Date published: 2024-08-09

Can this PIR switch be used with LED fixtures?

Asked by: Bryan10
Hello Bryan10, PW301R will support LED fixtures. Best Regards, Technical Support
Answered by: Justin
Date published: 2023-02-16

Is there a way to adjust the senstivy of this swiths

Asked by: Frank
Hello Frank, You can adjust the PIR sensitivity via DIP Switch #8 to the up position to decrease the PIR sensitivity. Best Regards,
Answered by: Justin
Date published: 2024-01-20

IS THERE ANY WAY TO OVERRIDE THE SENSOR SO THAT THE LIGHT WILL REMAIN ON EVEN IF NO MOTION IS DETECTED?

Asked by: LARRY NEMER
Hello, This sensor cannot be fully overridden and will always turn off after the given time delay. For assistance in configuring your device, please call in to technical support for assistance.
Answered by: Wiremold Tech Support
Date published: 2023-09-14
  • y_2024, m_11, d_4, h_8CST
  • bvseo_bulk, prod_bvqa, vn_bulk_3.0.42
  • cp_1, bvpage1
  • co_hasquestionsanswers, tq_11
  • loc_en_US, sid_PW-301-R, prod, sort_[SortEntry(order=LAST_APPROVED_ANSWER_SUBMISSION_TIME, direction=DESCENDING)]
  • clientName_legrand
  • bvseo_sdk, java_sdk, bvseo-4.0.0
  • CLOUD, getContent, 2ms
  • QUESTIONS, PRODUCT
Back to Top