Designed to fit and be concealed behind 42'' or larger flat screen displays. Can be installed in both new work and old work applications. Has 2 NEMA size openings for power, communication, or A/V devices. Box is also equipped with a storage module that will accept active A/V equipment up to 6 7/8'' x 9 1/8'' (175mm x 232mm) (dimensions include wire and cables) in size.
- Send
- Save as PDF
-
Added to Favorites Go to favoritesRemove from favorites?Something went wrong. Please try again later.
Features
- Designed to fit and be concealed behind 42'' or larger flat screen displays.
- Can be installed in both new work and old work applications. Has 2 NEMA size openings for power, communication, or A/V devices.
- Box is also equipped with a storage module that will accept active A/V equipment up to 6 7/8'' x 9 1/8'' (175mm x 232mm) (dimensions include wire and cables) in size.
Specifications
General Info
| Type | Wall Box | ||
| Application Sector | Commercial | ||
| Product Line | Wiremold | ||
| Country Of Origin | United States | ||
| Construction | Assembled | ||
| Standard | cULus Listed Metallic Outlet Boxes: File E2961 Guide QCIT/QCIT7 | ||
| UPC Number | 786776182699 |
Dimensions
| Product Depth US | 3.88 in | ||
| Product Length US | 13.0 in | ||
| Product Width US | 11.63 in | ||
| Cubic Capacity | 43 in³ |
Listing Agencies / 3rd Party Agencies
| cULus ListingNumber | E2961 | ||
| cULus Listed | Yes |
Buy American Act Compliance
| NAFTA | Yes |
Additional Information
| Product Environmental Profile | Yes | ||
| RoHS Compliant | Yes | This product meets the material restrictions of Article 4 of the RoHS Directive (2011/65/EU), including Commission Delegated Directive 2015/863. |
Technical Information
| Cable Entry | Knockouts | ||
| Number of Outlets | 2 |
Resources
Cutsheet
Installation Instructions
CAD Drawings
Evolution Series Replacement Device Module - EFS-DM
dxf
Evolution Series Replacement Divider - EFS-DIV
dxf
Evolution Series Replacement Mounting Bracket
dxf
Evolution Series Replacement Storage Module - EFS-SM
dxf
Evolution Series Replacement Trim Flange & Cover Assembly - EFSC
dxf
Evolution Series Replacement Tunnel - EFS-TUN
dxf
Evolution Series Two-Gang Wall Box - EFSB2
dxf
View More
Brochure
BIM Models
Supporting Document
Sell Sheet
Guide Form Specifications
Product Environmental Profile
Reviews
Bazaarvoice SAP Hybris Integration Version 2.8.1
Questions & Answers
Will this box be designed to work in the ambient temperature range of 3-24°C with often lots of moisture in the air? We are installing two interface plates in the box and need to protect these plates from moisture.
Hello,
The wall boxes are to be utilized in dry, interior locations as defined by Article 300-15 of the NEC. Unfortunately, we do not currently offer a wall box intended for damp environments. Please email us at technical.support@legrand.us for additional information.
Thank you
Date published: 2024-04-25
What is the Fire Rating for these wall boxes?
Hello Drew,
None of our wall boxes are considered fire rated.
Date published: 2023-03-09
IS THERE A KIT TO FEED A EFSB4 FROM THE BACK? LOW VOLT AND 120V. WE HAVE THESE IN PRECAST PANELS, AND WECANNOT HAVE CONDUIT RUN OUT OF THE TOP, OR BOTTOM
Hello, the Evolution wall boxes can only be fed from the top and/or bottom. They are designed for standard 2x4 stud and drywall applications only, and cannot be used in pre-cast wall systems. Unfortunately there are no wall boxes available for anything other than 2x4 wall construction.
Date published: 2021-04-15
Bazaarvoice SAP Hybris Integration Version 2.8.1