text.skipToContent text.skipToNavigation

RC4 Multi-Service Poke-Thru Assembly, Black

Unit includes four prewired 20A receptacles. Each duplex receptacle is wired as separate circuit. The duplex can be wired as a standard receptacle or isolated ground. Finish flange available in gray (GY), black (BK), ivory (VY) or brushed metal finishes in aluminum (AL), and brass (BS). Aluminum and brass flanges shipped with black slide cover. Brass flange also available with nonmetallic brass colored slide holder (AB). Aluminum flange also available with nonmetallic aluminum colored slide holder (AA). Includes Wiremold Open System unloaded adapters to accept four discrete keystone connectors from most manufacturers. Unit also includes Ortronics TracJack Mounting adapters and Ortronics Series II Communication Housing. Modular jacks sold separately. NOTE: Assembled with scrub water gasket. For use on tile or carpet floors. RC4 Series Poke-Thru Devices require a 4inch (102mm) diameter hole. Not designed to work with bare concrete or terrazzo. Floor covering thickness 1/8inch minimum.

Send
Save as PDF
Added to Favorites Go to favorites

Remove from favorites?

Something went wrong. Please try again later.

Features

Unit includes four prewired 20A receptacles. Each duplex receptacle is wired as separate circuit.
The duplex can be wired as a standard receptacle or isolated ground. Finish flange available in gray (GY), black (BK), ivory (VY) or brushed metal finishes in aluminum (AL), and brass (BS).
Aluminum and brass flanges shipped with black slide cover. Brass flange also available with nonmetallic brass colored slide holder (AB). Aluminum flange also available with nonmetallic aluminum colored slide holder (AA).
Includes Wiremold Open System unloaded adapters to accept four discrete keystone connectors from most manufacturers. Unit also includes Ortronics TracJack Mounting adapters and Ortronics Series II Communication Housing. Modular jacks sold separately.
NOTE: Assembled with scrub water gasket. For use on tile or carpet floors. RC4 Series Poke-Thru Devices require a 4inch (102mm) diameter hole. Not designed to work with bare concrete or terrazzo. Floor covering thickness 1/8inch minimum.

Specifications

General Info

Product Line	Wiremold
Color	Black
UPC Number	786564131540
Country Of Origin	Mexico
Number of Knockouts	2
Application Sector	Commercial
Standard	cULus Listed Metallic Outlet Boxes: File E2961 Guide QCIT, cULus Listed Nonmetallic Outlet Boxes & Fittings Classified for Fire Resistance: File R8209 Guide CEYY Meets Article 300.21 300.22[C] &314 of NEC
Type	Poke-Thru

Dimensions

Product Width US	8.25 in
Product Weight US	5.67 lb
Product Volume US	1114.86 cu in
Product Depth US	16.38 in
Product Height US	8.25 in
Cubic Capacity	24.5 in³
Core Hole Size	4 in

Additional Information

RoHS Compliant	Yes		This product meets the material restrictions of Article 4 of the RoHS Directive (2011/65/EU), including Commission Delegated Directive 2015/863.
Product Environmental Profile	Yes

Listing Agencies / 3rd Party Agencies

cULus ListingNumber	E2961
cULus Listed	Yes

Buy American Act Compliance

NAFTA

Yes

Technical Information

Number of Outlets

Resources

Can power be daisy chained thru this floor box to another floor box

Asked by: don

Single duplex, data for bare concrete floor 

Answered by: Tim

Date published: 2024-09-21

Does Wiremold CM2-U2KEYA-BK 2A Dual Unloaded Keystone Module fit in Wiremold RC4ATCBK Poke-Thru? If not, which module does?

Asked by: Amid Faddah

Hello, Yes, the CM2-U2KEYA-BK modules will fit in the RC4ATCBK poke-thru; two of the modules are included with the poke-thru assembly. Thank you