CordMate III Cord Management Kit - White
C310
Wiremold
CordMate III Cord Management Kit - Black is rated
out of
5 by
2.
Bazaarvoice SAP Hybris Integration Version 2.8.1
CordMate III High Capacity Cord Cover Kit is perfect for hiding larger bundles of home entertainment cabling, speaker wires, TV/video cabling and home office wiring. Peel and press backing makes for easy installation. Hinged lid allows easy access to cables. Stylish design complements any interior setting. White/ Paintable.
- Send
- Save as PDF
-
Added to Favorites Go to favoritesRemove from favorites?Something went wrong. Please try again later.
Features
- Ideal for concealing multiple low-voltage cords, wires and cables
- Suitable for covering home entertainment wires, speaker cables, TV/video cabling and home office wiring
- Paintable with latex-based paint
- Large capacity
- 2 flat elbows, 1 inside elbow, 1 outside elbow, 2 coupling/exit fittings and 1 ''T'' fitting included
Specifications
General Info
| Product Line | Wiremold | ||
| Color | White | ||
| UPC Number | 086698001697 | ||
| Country Of Origin | United States | ||
| Application Sector | Residential | ||
| Standard | Raceway is not NRTL Listed and is only designed for use in protecting electrical cords and low voltage wiring and cabling. | ||
| Type | Raceway |
Additional Information
| RoHS Compliant | Yes | This product meets the material restrictions of Article 4 of the RoHS Directive (2011/65/EU), including Commission Delegated Directive 2015/863. |
Buy American Act Compliance
| NAFTA | Yes |
Resources
Cutsheet
Installation Instructions
Reviews
Rated 3 out of
5
by
Christian from
Needs to be just a little more thought out
It may seem trivial to most, but it is a huge issue for my circumstance that there is no 45 degree outside (or inside or regular wall side) elbow. I am okay with it not being included (those types of parts are never adequately supplied in a single order, anyway), but the fact that it does not exist, at all, is very upsetting. I bought this to avoid that jury-rigged look, but I guess for anything but the most standard configuration cordmate can do no better than a jury rigged look. Still a good kit for the price.
Date published: 2024-10-26
Rated 3 out of
5
by
Mike H. from
Great capacity!
I agree 100% with Christian, this is a great solution for hiding cables if only on one side of the TV wall. but with 7 cables 3-left 4-right you need twice the hardware you get in the kit. You can't buy any extra fittings from here or anywhere else. you have to buy another kit. $40.00, thank you very much! yes I will recommend, with advice!
Date published: 2024-11-10
Bazaarvoice SAP Hybris Integration Version 2.8.1
Questions & Answers
Is the c310 plastic or medal?
Hello. These are nonmetallic. The components are from our Uniduct 2900 series, so you can find more details about it here: https://www.legrand.us/wire-and-cable-management/raceway-and-cord-covers/nonmetallic/uniduct-2900-series-one-piece-latching-raceway-fitting/p/2900-wh?srsltid=AfmBOor6lM3wt9zcQMoq4kVaWkbEJhoBjxWZIeEC2zHC5xgIhMWKsATr
Thanks!
Date published: 2024-12-09
Are there screw holes in the raceway to provide options for extra security?
Hello,
The raceway base has adhesive and does not have pre-drilled mounting holes.
This raceway is designed for low voltage cabling (50V or less).
Date published: 2024-10-16
I'm renting and would need to remove these when I move out. Does the adhesive damage paint or leave a sticky residue when removed?
Hello. The adhesive is designed to form a strong bond to the mounting surface, which could be difficult to remove or cause damage if removed without caution. However, if done carefully, the raceway and adhesive can be fully removed without causing damage. For instructions on this process please visit the following link: https://legrand.my.site.com/knowledgebase/s/article/Raceways-Removing-plastic-raceways-with-adhesive-backing-from-the-wall. Thanks!
Date published: 2024-09-23
What is the temperature rating for the adhesive on The C310. I want to mount on an aluminum sofit in a dry eave.
Hello. We recommend using the adhesive backing only to hold the raceway in place during installation; the raceway should ultimately be secured using screws appropriate for the mounting surface. Thanks!
Date published: 2024-09-12
Can adapters, (inside elbow to outside elbow) be glued together? I need to do this in a tight unlevel spot. If it can, what type of glue?
HI,
No they are not made to be glued together. Those pieces are made to snap over sections of the raceway.
Thanks,
Date published: 2024-03-28
Is cornermate II compatible with cordmate III ? Can you tell me the part number?
Hi,
No they are not compatible with each other.
Thanks,
Date published: 2024-03-28
Is there a cornermate III or a cornermate that is compatible with cordmate III ? Can you tell me the part number?
Hello.
No, we do not have any transitions to offer for Cornermate to Cordmate III.
Thanks.
Date published: 2024-03-28
I don't know what it's called but I want to transition from the end of a section of Cordmate III to a hole on the wall. It's a tapered box, like a reducing coupler. I have used them in other brands of raceway, but am now doing a job with Cordmate III.
Hi,
You can take a look at 2986-WH and see if that would work for you.
Thanks,
Date published: 2023-11-25
Bazaarvoice SAP Hybris Integration Version 2.8.1