Plugmold Six Outlet Cord-Ended Strip in Ivory

Hello. This Plugmold should include mounting clips when purchased. We do not have an individual part number to order the clips separately, but if your Plugmold is missing the mounting hardware, please contact us directly so we can arrange to get replacements for you. Thanks!

Hello. This Plugmold should include mounting clips when purchased. We do not have an individual part number to order the clips separately, but if your Plugmold is missing the mounting hardware, please contact us directly so we can arrange to get replacements for you. Thanks!

Hi Mel, This unit is not modular so the devices themselves cannot be changed or swapped out. The P4AC20 would be our closest option as a cord ended plug in outlet center with USB ports. https://www.legrand.us/wire-and-cable-management/furniture-power-and-table-boxes/on-surface-furniture-power/20w-usb-c-plug-in-outlet-center/p/p4ac20?text=p4ac20 If you need any additional information, please feel free to reach out to us directly at 1-844-957-3783, option 2 for Wiremold, followed by option 2 again for tech support. You can also email us directly at technical.support@legrand.us. Thank you.

Hello JimmyBob, To reset the breaker, unplug the strip from the wall and push the breaker back in on the end cap. If this does not work we'll gladly replace the product if it falls within the Warranty period which is one year from the date of original installation or two years from the date of purchase, whichever is sooner. For any additional questions feel free to reach us direct at 1-844-957-3783. From the main menu choose option 2 for Wiremold followed by option 2 for Technical Support. Thank you for your interest in our product.

Hello, This question is posted under a plug in outlet center with a resettable circuit breaker. If the strip you have is hardwired there is no circuit breaker on those units. I would suggest giving us a call to discuss the actual model you have. We can be reached at 1-800-621-0049, option 3 for tech support.

If you are referring to hardwired Plugmold strips with 15A, 120V simplex receptacles, a 10' run can be accomplished by joining (2) 5' sections together. The part numbers for the 5' sections are S20GB506TR if you need the receptacles to be tamper resistant (TR) and S20GB506 if you do not need TR receptacles. These units are stainless steel. We do not offer Plugmold in chrome. To join the 5' units together you must use a 2001 coupling (one included with each strip) and an S2006 cover clip (sold separately). If you are referring to cord ended units, unfortunately, we do not offer them in 10' lengths. The longest we offer is 77" in gray finish. An example of such a unit is the 7712ULBC. This unit has (12) 15A, 120V receptacles and a 6' cord. Here's a link: https://www.legrand.us/wiremold/power-distribution/cabinetmate-power-only/7712ulbc-plug-in-outlet-center-unit.aspx

The switch at the end is the circuit breaker reset. The switch is only used if the strip were to trip, and you can reset it. If it tripped, then all outlets would not work. If only one outlet does not work, and the rest do, the unit itself may be need to be replaced.

I found the VPMAP, Accessory Pack for Plugmold Strips for $5.97 at Home Depot before I got your response. It includes the brackets that I was looking for. It wasn't free but still a reasonable solution. Thanks