adorne® Locator Status Light
AALSL6
adorne Collection
adorne Locator Light is rated
out of
5 by
28.
Bazaarvoice SAP Hybris Integration Version 2.8.1
$5.56 USD
Always find the switch with ease, even in the dark, with this convenient locator light. A great addition to any adorne switch or dimmer.
Voltage
125 V
- 125 V
- 277 V
Quantity
In Stock
- Send
- Save as PDF
-
Added to Favorites Go to favoritesRemove from favorites?Something went wrong. Please try again later.
Specifications
General Info
| Product Line | Pass & Seymour | ||
| Color | Clear | ||
| Finish | Matte | ||
| UPC Number | 785007022803 | ||
| Country Of Origin | China | ||
| Features | Nightlight | ||
| Device Front Face Size | Full-Size | ||
| Device Backbody Size | Plus-Size | ||
| Application Sector | Residential | ||
| Standard | CULUS, ETL Listed | ||
| Type | Switch |
Dimensions
| Product Width US | 0.2 in | ||
| Product Depth US | 0.2 in | ||
| Product Height US | 4.4 in |
Technical Information
| Compatibility | Residential Wiring | ||
| Terminals | Wire Lead | ||
| Connection | Screw Terminals | ||
| Lens Color | Clear | ||
| Wire Size | #14 - #10 AWG | ||
| Lens Material | Thermoplastic | ||
| Wattage | 0.175 W | ||
| Battery | Not Required | ||
| Voltage | 125.0 V | ||
| Connection Type | Internal Pressure Plates | ||
| Lamp Type | LED |
Resources
Cutsheet
Installation Instructions
CAD Drawings
Brochure
Supporting Document
Customer CAD PDF
Reviews
Rated 5 out of
5
by
Jason from
Perfect Look
Easily installed. Looks just as advertised and gives a nice touch to the decor.
Date published: 2020-12-25
Rated 5 out of
5
by
Happy Adorne Consumer from
Functional, Easy Install
Easy installation. Love the subdued, but visible at night, glow from this switch night-time locator.
Date published: 2024-06-08
Rated 5 out of
5
by
Alex from
Easy install.
Very easy install, works as advertised. Nice addition to find the lights in the morning.
Date published: 2024-03-10
Rated 5 out of
5
by
Robert from
Very easy to install
It’s so simple to install…thank goodness. The light on the switch helps find the switch in the dark.
Date published: 2024-03-07
Rated 5 out of
5
by
Laurie from
Legrand Adorne Loft Conversion
We love the Adorne Locator Lights that can be added to any switch as needed. We saw Legrand Adorne switches and outlets in a new house and decided to upgrade our loft by replacing all the switches and outlets with Legrand products. Legrand has a product for every situation from basic to more unusual from USB-C ports to fan speed controls. We're about a third of the way through the conversion and it really makes a huge difference. Our loft looks more high-end for an affordable price. The switches and outlets are easy to change out from the old ones. Not having screw-heads showing looks so nice. The Legrand products will surely improve our property values.
Date published: 2024-03-01
Bazaarvoice SAP Hybris Integration Version 2.8.1
Questions & Answers
Does the locator light AALSL6 work with single paddle? (I have 2 half-size module switches in one - aspd1531w4). The hole in the back of the half size switch does not seem to fit the locator light.
Hello Marie,
The adorne locator light part number AALSL6 is compatible with the adorne half side paddle ASPD1531W4. Please contact Pass & Seymour Technical Support for further assistance.
Pass & Seymour Technical Support
Phone #: 800-223-4185
Monday - Friday | 8:00am - 6:00pm Eastern Standard Time (excluding holidays)
Best Regards,
Technical Support
Date published: 2023-05-04
I wired up a locator light for a 1-pole operated ceiling fan. Wired to 1-pole and 3-way per the instructions. The light will come in very weak and then fade out. I’ve wired other 1-pole switches the same with no issue. Is there a way to resolve this?
Hello,
Please wire the locator light leads as follows:
-1 lead to hot
-1 lead to neutral
This wiring method will always leave the locator on in your specific application due to being connected to a ceiling fan.
Best Regards,
Justin
Date published: 2024-06-26
Yesterday I installed a standard paddle switch and installed the locator light - which I tested to be sure it was lighting, and it is not visible through the switch when installed. Is there some way to test the switch light transmission and remedy this?
Please contact Technical Support for assistance with resolving this installation issue:
adorne products
1.800.223.4185 opt 3
Mon - Fri: 8am - 6pm EST
(excluding holidays)
Email Us - tech.support@legrand.us
Date published: 2020-11-21
What is the difference between locator light model numbers AALSL6 & AALSL277?
The difference between the two is AALSL6 is rated for 120V circuit and AALSL277 is rated for 277V circuits?
Date published: 2020-06-01
Installed the locator light on paddle switch 3 way with an softap dimmer, the locator light is not light up neither light is on or off. please advise
You should try contacting customer service directly. They’re very helpful.
Date published: 2020-03-07
Is there a way wire the locator light (single-pole/single switch configuration) so locator light is ON when light is on? I have a closet with switch on outside and light gets left on at times. Seeing locator light on would be a reminder that it is on.
To wire the Locator Light as a Pilot Light(lit when on), you need to connect one of it's leads to the 1pole terminal and one to a separate Neutral wire.
Date published: 2024-06-26
How to hook up 4 way
When installing the Locator Status Light in a 4way Paddle switch, the two leads are connected to either both IN terminals or both OUT terminals....see attached
Date published: 2023-12-27
I notice that when I add a paddle switch and the gang plate along with the AALSL6 | adorne, that the paddle becomes really spongy and you don't hear the click and sometimes not even see the light...how do I make sure the AALSL6 | adorne is seated correctl
The light IS inserted too far. It's not impossible to do as I spent an hour swapping switches thinking one was faulty everytime I put in the locator. In fact the instructions or the locator light are faulty - they don't give the right info or the stick is actually too long. If you push the light-stick all the way in so the "bezel" of the light is touching the back of the switch housing (as you would expect to do) the light somehow touches something in the paddle switch and gets in the way so that the switch loses it's "CLICK" when turned on/off. Once the stick is backed out 1/8" or so the switch-click will come back. Hopefully the instructions for this product or the design will be revised - seems like it wasn't ever tested. PS - It's really really a nice feature, and well worth the couple bucks extra, just needs the kinks worked out.
Date published: 2024-11-08
Bazaarvoice SAP Hybris Integration Version 2.8.1
You may also like...
Added to Favorites
Go to favorites
Remove from favorites?
Something went wrong. Please try again later.
ASWR1532W4 | adorne Collection
Control your lights with a light fluid motion.
$14.47
Added to Favorites
Go to favorites
Remove from favorites?
Something went wrong. Please try again later.
ASPD1532W4 | adorne Collection
Upgrade any standard switch with this sleek paddle alternative.
$7.24