text.skipToContent text.skipToNavigation

20A 125V Hard Use Spec-Grade Duplex Receptacle, Back and Side Wire, Red

5362RED Pass and Seymour

eHard Use Spec Grade Duplex Receptacle Back and Side Wire 20A 125V

Color Red

Send
Save as PDF
Added to Favorites Go to favorites

Remove from favorites?

Something went wrong. Please try again later.

Features

Corrosion-resistant, plated and tabbed steel strap locked in to face and back body to resist pulling away from face/body assembly.
Two drive screws anchor strap to back body and face where abrupt removal torque is greatest.
Easily accessed break-off, line-contact connecting tab for fast, easy split-circuit wiring.
Impact-resistant nylon face.
8 hole internal screw-pressure-plate back wire terminals accept #10 - #14 AWG solid or stranded copper or copper-clad conductors.
Terminal compartments isolated from each other for positive conductor containment.
Auto-ground clip assures positive ground.
For covering patents, see www.legrand.us/patents.
For compatible wall plate options, from our TradeMaster unbreakable plates to our radiant screwless plates to our metal wall plates, click here.
Temperature Rise: Maximum 30°C temperature rise at full-rated current after 50 cycles of overload at 150% of rated current with direct current. Operating Temperature: Maximum continuous +60°C, minimum -40°C without impact

Specifications

General Info

Product Line	Pass & Seymour
Color	Red
Finish	Matte
UPC Number	785007536249
Country Of Origin	Mexico
Number of Receptacles	2
Application Sector	Commercial
Standard	UL498, CSA C22.2 No. 42, FEDSPEC
Warranty Type	1-Year Limited Warranty
Type	Outlet

Dimensions

Product Width US	1.32 in
Product Depth US	0.78 in
Product Height US	2.635 in

Listing Agencies / 3rd Party Agencies

cULus ListingNumber	140596
cULus Listed	Yes

Technical Information

Dielectric Strength	Withstands 2000V minimum
Temperature Rating	-40° - 60° C
Amperage	20 A
Number of Poles	Double Pole
Wire Size	14 - 10 AWG
Indoor/Outdoor	Indoor

Resources

Cutsheet

Hard Use Receptacles, SF310R1

pdf

Brochure

Pass & Seymour Commercial and Industrial Products

pdf

Reviews

Questions & Answers

Does HARD USE REC comply with NFPA 70? If so please send me the cut sheet.

Asked by: Anonymous

Thank you for your inquiry. To provide further assistance with your compliance request, please contact Legrand Pass & Seymour Technical Support at (800) 223-4185 between 8:00 a.m. and 6:00 p.m. EST or via email at Tech.Support@legrand.us.

Answered by: Justin

Date published: 2024-10-28

Where can I find the cut sheet with the screw torque spec?

Asked by: darkestdot

Thank you for your inquiry. The required torque for the terminal screws, including all Legrand/Pass & Seymour Ground Fault Circuit Interrupter (GFCI) Receptacles, and 15, 20, and 30 Amp Switches and Receptacles, are 14 to 18-inch pounds.

Answered by: Justin

Date published: 2024-10-14

what torque rating do we use to tighten the screws which hold the wire onto the device?

Asked by: Mike

Is there a cut sheet that states the torque value

Answered by: David P

Date published: 2024-10-11

Where would I find general installation instructions for standard commercial grade receptacles?

Asked by: Jared Avery

See the attached instructions for our single and duplex receptacles

Answered by: Legrand Technical Support

Date published: 2024-05-23