text.skipToContent text.skipToNavigation

20A 125V Heavy Duty Specification Grade Decorator Duplex Receptacle, Gray

26352GRY Pass and Seymour

Heavy-Duty Decorator Spec Grade Duplex Receptacle Back and Side Wire 20A 125V

Color Gray

Send
Save as PDF
Added to Favorites Go to favorites

Remove from favorites?

Something went wrong. Please try again later.

Features

Corrosion-resistant, plated steel strap locked into assembly to prohibit strap from bending away from body.
Heavy-duty compact design for easier installation and long lasting performance.
Easily accessed break-off, line-contact connecting tab for fast, easy split-circuit wiring.
Impact-resistant nylon face.
Terminal compartments isolated from each other for positive conductor containment.
All devices fit standard #26 opening wall plate.
Tri-drive terminal and mounting screws.
Auto-ground clip assures positive ground.
Temperature Rise: Maximum 30°C temperature rise at full-rated current after 50 cycles of overload at 150% of rated current with direct current. Operating Temperature: Maximum continuous +60°C, minimum -40°C without impact

Specifications

General Info

Product Line	Pass & Seymour
Color	Gray
Finish	Matte
UPC Number	785007785371
Country Of Origin	Mexico
Number of Receptacles	2
Application Sector	Commercial
Standard	UL498, cUL CSA, FEDSPEC
Warranty Type	1-Year Limited Warranty
Type	Outlet

Dimensions

Product Width US	1.322 in
Product Depth US	0.78 in
Product Height US	2.635 in

Listing Agencies / 3rd Party Agencies

cULus ListingNumber	140596
cULus Listed	Yes

Technical Information

Dielectric Strength	Withstands 2000V minimum
Temperature Rating	-40° - 60° C
Amperage	20 A
Number of Poles	Double Pole
Wire Size	14 - 10 AWG
Indoor/Outdoor	Indoor

Resources

Cutsheet

15 & 20A Construction-Grade Receptacles

pdf

Sell Sheet

Bulk Packaging Solutions

pdf

Reviews

Questions & Answers

Does this receptacle color and sheen match the radiant line of wiring devices (in particular, the black finish)?

Asked by: CBL

Thank you for your inquiry. We suggest using Pass & Seymour part number TR26352RBK, which complements the radiant Black finish. Best Regards, Technical Support

Answered by: Justin

Date published: 2024-03-20

Are your receptacles rated for " back stabbing" or do you need to make a hook when wiring with solid wire 

Asked by: Mikeyc

Hello Mikey, you can use the "backstabbing" method as the internal screw-pressure-plate back wire accepts #14 – #10 AWG solid or stranded wire.

Answered by: Wiremold Tech Support

Date published: 2024-07-03