text.skipToContent text.skipToNavigation

Industrial Extra Heavy Duty Spec Grade Receptacles, Corrosion-Resistant, Back and Side Wire, 20A, 125V, Yellow

CR6300 Pass and Seymour

Industrial Extra Heavy-Duty Spec Grade Duplex Receptacle Corrosion-Resistant Back and Side-Wire 20A 125V Yellow

Send
Save as PDF
Added to Favorites Go to favorites

Remove from favorites?

Something went wrong. Please try again later.

Features

One-piece brass mounting strap with integral ground.
Strap tabs wrap around and lock down on face to prevent strap from separating from face and back body.
Two drive screws anchor strap to back body and face.
Exclusive patented feature, circuit label on face allows permanent circuit identification.
.036 inch thick, brass, triple-wipe power contacts for lasting retention.
Easily accessed break-off, line-contact connecting tab for fast, easy split-circuit wiring.
Impact-resistant nylon face and back body.
Oversized #10 deep tri-drive head brass terminal and ground screws.
Exclusive patented feature, external screw-pressure-plate back wire clamp on ground terminal for faster, easier installation.
External screw-pressure-plate back wire clamps with #10 brass terminal screws for visual assurance of a good connection.
Line terminals accept #14 -- #10 AWG stranded or solid copper clad conductors.
Auto-ground clip assures positive ground.
Corrosion-resistant models have nickel-plated straps and contacts.
For covering patents, see www.legrand.us/patents.
For compatible wall plate options, from our TradeMaster unbreakable plates to our radiant screwless plates to our metal wall plates, click here.
Temperature Rise: Maximum 30°C temperature rise at full-rated current after 50 cycles of overload at 150% of rated current with direct current. Operating Temperature: Maximum continuous +60°C, minimum -40°C without impact

Specifications

General Info

Product Line	Pass & Seymour
Color	Yellow
UPC Number	785007630046
Country Of Origin	Mexico
Application Sector	Industrial
Standard	cULus UL498, CSA C22.2 No. 42, FEDSPEC

Dimensions

Product Width US	1.625 in
Product Depth US	0.9 in
Product Height US	2.75 in

Listing Agencies / 3rd Party Agencies

cULus ListingNumber	140596
cULus Listed	Yes

Technical Information

Dielectric Strength	Withstands 2000V minimum
Connection	Back and side wire
Number of Wires	3
Temperature Rating	-40° - 60° C
Amperage	20 A
Number of Poles	Double Pole
Wire Size	14 - 10 AWG
Environmental Conditions	Flammability: UL94 V2

Resources

Cutsheet

Extra Heavy Duty Receptacles, SF301R1

pdf

Reviews

Questions & Answers

What makes this outlet corrosion resistant? I need something that would go in a room with acid fumes 

Asked by: Timd

Corrosion resistant devices are engineered to perform where chemical vapors, moisture and humidity create corrosive environments. Corrosion-resistant models have nickel-plated straps and contacts.

Answered by: Legrand Technical Support

Date published: 2021-12-01

Would the Ind. Extra Heavy-Duty Spec Grade Receptacles, Corrosion-Resistant, w/ corrosion resistance be a good choice for an area that is cleaned with the following chemicals: Tetrasodium ethylene diamine tetracetate or Alkyl dimethyl ammonium chloride?

Asked by: Karl

The CR6300 has not been tested with these specific chemicals so we will need to get samples of each and test. CR6300 is Nylon 6 for body and cover with plated brass for the strap, contacts and screws. Nylon 6 (PA6) is generally chemically resistant. Plated Brass is generally chemically resistant.