text.skipToContent text.skipToNavigation

PlugTail® Decorator Split Circuit Spec Grade Receptacle, 15A, 125V, White

PT26262SCW Pass and Seymour

PlugTail® Decorator Split Circuit Spec Grade Receptacle, 15A, 125A

Color White

Send
Save as PDF
Added to Favorites Go to favorites

Remove from favorites?

Something went wrong. Please try again later.

Features

.036 inch thick, brass, triple-wipe power contacts for lasting retention.
Plated steel wrap strap design for maximum durability and corrosion resistance.
No exposed terminals create a finger safe application before, during, and after installation.
Built-in connector features large brass terminal blades to ensure consistent, reliable electrical connections.
Crimped and welded contacts.
Ultrasonically welded polycarbonate connector housing secures terminations and conductors in a UL Listed, finger safe housing.
Large brass contacts snugly terminate on device blade terminals.
Pre-stripped connector leads fasten to conductors, easier than standard pigtails.
Auto-ground clip assures positive ground.
For covering patents, see www.legrand.us/patents.
For compatible wall plate options, from our TradeMaster unbreakable plates to our radiant screwless plates to our metal wall plates, click here.
Temperature Rise: Maximum 30°C temperature rise at full-rated current after 50 cycles of overload at 150% of rated current with direct current. Operating Temperature: Maximum continuous +60°C, minimum -40°C without impact
PlugTail™ Connector: #12 AWG, THHN, copper conductor, 6" leads, stripped, solid or stranded, for use with PlugTail Receptacles only

Specifications

General Info

Color	White
Application Sector	Commercial
Product Line	Pass & Seymour
Country Of Origin	Mexico
Features	Single Piece Plated Steel Mounting Strap, Split Circuit
Wall Plate Included	No
Number of Receptacles	2
Outlet Type	Straight Blade
Warranty Type	1-Year Limited Warranty
Standard	cULus UL498, FEDSPEC
UPC Number	785007000375

Dimensions

Product Depth US	0.625 in
Product Height US	2.75 in
Product Width US	1.5 in

Listing Agencies / 3rd Party Agencies

cULus Listed

Yes

Technical Information

Amperage	15 A
Connection Location	Back Only
Wire Connection Type	PlugTail
Dielectric Strength	Withstands 2000V minimum
Environmental Conditions	Flammability: UL94 V2
Indoor/Outdoor	Indoor
NEMA Configuration Code	5-15R
Number of Poles	Double Pole
Number of Wires	3
Operating Temperature	-40°-60°C
Operating Temperature Max	60 °C
Operating Temperature Min	-40 °C
Voltage	125.0 V
Wire Size	12 AWG

Resources

Recently Viewed

30A Weather-Resistant Electrical Outlet for RVs / EV Chargers

3830WR | Pass and Seymour

30A, 125V Weather-Resistant Electrical Outlet for RVs, Travel Trailers and EV Chargers.

View Details

8In Surface Style Cover Brushed Aluminum

8CTC2AA-NA | Wiremold

Convenient connectivity where you need it most.

View Details

50A Weather-Resistant Electrical Outlet for RVs

3894WR | Pass and Seymour

Provides power access to RVs and travel trailers.

View Details

6in Surface Style Heavy Duty Cover Assembly

6CTCHDSS | Wiremold

6CT Heavy-Duty EVOLUTION™ RECESSED POKE-THRU Cover works with both Evolution Poke-Thru Devices and RFB Evolution Series Floor Boxes, protecting electrical, data and A/V connections from loads up to 8000 pounds.

View Details

Series 16 45° Black Double Set Screw Panel Mount - Female

PS45FRBBK | Pass and Seymour

45 degree angle is perfect for applications where cables protruding 90 degrees from the panel is impractical. Type 3R Rated for Indoor and outdoor use.

View Details

Series II, two-port Clarity 5E,T568A/B, 180 degree, Wiremold Ivory

S225E00-99 | Ortronics

SERIES II, TWO-PORT CLARITY 5E,T568A/B, 180°

View Details

30A 125/250V 14-30R Straight Blade Single Flush Receptacle, 3-Pole, 4-Wire

3864 | Pass and Seymour

Power Outlets

View Details

Non-Networked Level 2 Hardwired Charger

L2EVSE48AC | Pass and Seymour

Hardwired Level 2 EV Charger for homes. 48A, for indoor or outdoor use.

$669.43

View Details

Keystone, 1/4" Stereo Jack, Solder, Cloud White

KS14ST-88 | Ortronics

Ortronics TRS ¼" stereo jacks are often used to interface with a variety of sound devices such as guitars, microphones, headphones, and professional audio equipment such as loudspeakers, mixers, and amplifiers.

View Details

25DTC Series Blank Steel Poles

25DTC-412WH | Wiremold

Bring Wiring Down to Business

View Details

500/700 Two-Gang Switch and Receptacle Box Fitting

5748-2WH | Wiremold

Add or extend power, phone, or data lines.

View Details

coil of DLM Shade Bus Cable Assemly, 3 Feet Plenum Rated

DLM Shade Bus Cable Assembly, 3 Feet Plenum Rated

LMSH-SBCA-P03 | Wattstopper

LMSH-SB series cables have four wires and are designed to connect DLM shades and power supplies together. There are a variety of lengths and accessories that make cable selection and system layout easy and intuitive. The DLM shade control system can be wired together without tools using the wiring and accessories in the LMSH-SB series.

View Details