text.skipToContent text.skipToNavigation

Specifications: Single Pole, Compatible with all loads, 600W 120V 60Hz Rating

radiant® Single-Pole 3-Way Vacancy Sensor, White

RRW600VW radiant Collection

Never worry about leaving the lights on, with the radiant® Vacancy Sensor. It automatically shuts off when a room is empty, and includes an adjustable delay setting of up to 20 minutes to match your needs. Designed for ease and style, it features a built-in locator light, and the sleek, clean lines of radiant® for a sophisticated touch. Made exclusively for use with screwless Wall Plates from the radiant® Collection, sold separately.

Color White

Send
Save as PDF
Added to Favorites Go to favorites

Remove from favorites?

Something went wrong. Please try again later.

Features

Passive infrared (PIR) sensor switch technology with 180° coverage up to 600 sq. ft. Rated for up to 600W (5A) of LED lighting.
Works with virtually any bulb/fixture, including: LED, incandescent, fluorescent, compact fluorescent (CFL), magnetic low-voltage (MLV) and electronic low-voltage (ELV), 1/6 hp.
Turn the light on when you enter, and let it turn itself off automatically after you leave for true convenience. Perfect for bathrooms, hallways, closets, garages, and more.
Locator light illuminates when switch is off, emitting a soft glow to help you find it in the dark.
Features an adjustable time delay to off after no motion is detected. Delay settings range from 30 seconds to 20 minutes after the room is vacated (default 20 minute delay).
Manual ON/Auto OFF functionality. Meets California Title 24 requirements for automatic off lighting control.
Replace any basic light or fan switch in 15 minutes or less. Supports single pole and multi-location installs. No neutral required.
Complete the look with a sleek, screwless radiant® Wall Plate, and coordinate with other designer switches and outlets available from the radiant® Collection.
More color options available to fit any style, including finishes to match current hardware and lighting trends.

Specifications

General Info

Product Line	Pass & Seymour
Color	White
Finish	Matte
UPC Number	785007445794
Country Of Origin	China
Features	Motion Sensor
Switch Type	Motion Sensor
Application Sector	Residential

Dimensions

Product Width US	1.69 in
Product Depth US	1.88 in
Product Height US	2.63 in

Listing Agencies / 3rd Party Agencies

cULus Listed

Yes

Technical Information

Target Size	180 deg
Response Frequency	60 Hz
Sensor Type	Vacancy
Amperage	5 A
Number of Poles	3-Way, Single Pole
Wire Size	#14 - #10 AWG
Requires Neutral Wire	No
Indoor/Outdoor	Indoor
Wattage	600 W
Mounting Type	Box
Sensitivity	60Hz

Resources

Can I use this switch if the wire that runs to the light/load is in the box with the mechanical 3-way switch?  How would I wire this?  Thanks. 

Asked by: Steve22

Thank you for your inquiry. We require additional information to assist you further with your request. Please contact Legrand Pass & Seymour Technical Support at (800) 223-4185 between 8:00 a.m. and 6:00 p.m. EST or via email at Tech.Support@legrand.us.

Answered by: Justin

Date published: 2024-07-01

Is it ok to use this switch with a ceiling fan light?

Asked by: Daniel Alejo

Thank you for your inquiry. The RRW600VTC supports the following loads: LED/CFL: 600W (5A) Incandescent/ELV: 600W MLV: 600VA ELV: 5A Motor: 1/6 hp Best Regards, Technical Support

Answered by: Justin

Date published: 2024-04-11

is this switch Ok on a 20 amp circuit?

Asked by: merlin Huff

Yes this device can be used on a 20 A, 120V circuit.

Answered by: Wiremold Tech Support

Date published: 2023-04-10

We just bought new construction that is full of these discontinued switches with no instructions. How do you change the settings?

Asked by: Laura

The Radiant Vacancy sensor is still an active model number. Here is the link to the full set of instructions for it. See Table 1 and Table 2 for changing it's settings. https://legrand.webdamdb.com/directdownload.php?ti=55653156&tok=6WqaBwyH0xLnEKUBoQO49gRR