Discontinued - 120V Single Pole 3-Way Occupancy/Vacancy Sensor, Manual Operation, Light Almond
RW3U603LA
Pass and Seymour
Bazaarvoice SAP Hybris Integration Version 2.8.1
- Send
- Save as PDF
-
Added to Favorites Go to favoritesRemove from favorites?Something went wrong. Please try again later.
Features
- Occupancy-based control plus multi-way operation. California Title 24 compliant.
- Two or more RW3U603 sensors connected together will allow enhanced coverage of the controlled space.
- Replaces 3-way or 4-way switches when used with other RW3U603 sensors.
- Adjustable time delay of 15 seconds, 5, 15, 30 minutes.
- Lighted switch for visibility in darkened rooms.
- Manual-ON operation.
- Adjustable light level setting of 10 to 150 fc (100 to 1500 lux). Coverage: 180 degrees, max. 600 ft.2 (56m2).
- Load: Incandescent, Fluorescent, Compact Fluorescent (CFL), Magnetic Low-Voltage (MLV) and Electronic Low-Voltage (ELV) 1/6 hp.
- For covering patents, see www.legrand.us/patents.
Specifications
General Info
| Product Line | Pass & Seymour | ||
| Country Of Origin | China | ||
| Replaced by Part Number | CH-250-LA | ||
| UPC Number | 785007000474 |
Technical Information
| Sensor Type | Occupancy, Vacancy |
Resources
Installation Instructions
Specifications
Cutsheet
Reviews
Bazaarvoice SAP Hybris Integration Version 2.8.1
Questions & Answers
Can I use LED bulbs with these motion sensing switches?
Hello Joe,
The RW3U603I is compatible with LED bulbs, please review the complete list of compatible loads below.
Load: Incandescent, Fluorescent, Compact Fluorescent (CFL), Magnetic Low-Voltage (MLV) and Electronic Low-Voltage (ELV) 1/6 hp.
Best Regards,
Technical Support
Date published: 2023-02-03
are they dual voltage 277/120v or just 120v? if just 120v do you have one that will do both voltages in a 3 way and 4 way?
The RW3U600 is rated for 120V only. The PW301W is rated for 120/277V and can be installed in multiple locations for 3way/4way applications
Date published: 2021-09-02
how many motion detector switches needed in a 3 way operation. do i need 2 motion detectors to replace both 3 way switches or will replacing just 1 of the switches work?
The RW3U603 can be installed for a 3way by using two of the same sensor or one sensor and one TM870STM single pole momentary switch for multi-way Manual-ON/OFF single load control. Wiring diagrams for both ways are illustrated on the instruction sheet.
https://legrand.webdamdb.com/directdownload.php?ti=55658223&tok=XkLCQI3TvmpRc65xhHk8MwRR
Date published: 2021-07-08
Bazaarvoice SAP Hybris Integration Version 2.8.1
Recently Viewed
Added to Favorites
Go to favorites
Remove from favorites?
Something went wrong. Please try again later.
S4418BAC | Pass and Seymour
Shallow 4-inch Square Box with Threaded Mounting Holes
Added to Favorites
Go to favorites
Remove from favorites?
Something went wrong. Please try again later.
DW-311-347-G | Wattstopper
The DW-311 dual technology dimming wall switch sensor can turn lights OFF and ON based on occupancy and allow the user to increase or decrease the lighting level
Added to Favorites
Go to favorites
Remove from favorites?
Something went wrong. Please try again later.
CDDH16I | Pass and Seymour