text.skipToContent text.skipToNavigation

Front of PIR Ceiling Occupancy Sensor 24VDC/AC, Isolated Relay

Front of PIR Ceiling Occupancy Sensor 24VDC/AC, Isolated Relay loading=

Discontinued - PIR Ceiling Occupancy Sensor 1, 200 sq. ft. 24 VDC

Replaced by CI-300

Wattstopper’s CI-200 Series Passive Infrared (PIR) Ceiling Sensors provide 360° coverage to detect occupancy in the controlled area. These low-profile sensors reliably control lighting in a variety of applications.

Contact Rating 1 A @ 30 VDC/VAC

1 A @ 30 VDC/VAC

Footprint 1200 sq ft

1200 sq ft

Send
Save as PDF
Added to Favorites Go to favorites

Remove from favorites?

Something went wrong. Please try again later.

Features

360° coverage
User-adjustable time delay and sensitivity
Low-profile design
Built-in light level sensor
Isolated relay for use with HVAC or other control systems
ASIC enhances reliability and helps eliminate false triggers
Automatic or manual-on operation when used with a BZ-150 Power Pack

Specifications

General Info

Product Line	Wattstopper
Replaced by Part Number	CI-300
UPC Number	754182913282
Country Of Origin	China

Dimensions

Product Width US	3.0 in
Product Weight US	0.4 lb
Product Volume US	38.67 cu in
Product Depth US	3.75 in
Product Height US	2.75 in

Technical Information

Sensor Type	Occupancy
Sensor Technology	Passive Infrared (PIR)

Resources

I have a ci 200 series installed in some massage rooms. They are at max setting of 30 minutes and the lights are coming on halfway through a 1 hour session. Is there a solution for this?

Asked by: Mike

Please reach out to our tech. support team for further assistance with over-riding this sensor. Legrand Technical Support: Phone: 1 800-879-8585, Option 3 then Option 1 Mon - Fri: 7am - 7pm CST (excluding holidays)

Answered by: Tier 1 Tech Support

Date published: 2023-03-07

If I set the dip switch 6 to on/enable override, Does the sensor still do auto off or will the sensor be manual on/manual off?

Asked by: Frank

setting DIP switch #6 to bypass will override all the sensor’s occupancy control functions. Lights can still be manually on/off controlled with a light switch.

Answered by: Tier 1 Tech Support

Date published: 2023-12-15

Lights cycle on and off , been install for 10 years , just start this issue, power supply BZ-50 or sensor CI-205 problem? Are sensor W-500A and W-1000A obsolete ? if so what Replacement recommend ?

Asked by: Michael Brown

Most likely the power pack is the cause. W500A DISC REC SUB UT3051 W1000A DISC REC SUB UT3052

Answered by: Legrand Technical Support

Date published: 2022-10-24

I would like to completely disable the sensor. How can I do this?

Asked by: MSSLA

Place all of the dip switches in the On position except for number 6, it will remain Off. This will place the sensor into Service mode.

Answered by: Tier 1 Tech Support

Date published: 2021-09-15

Discontinued - PIR Ceiling Occupancy Sensor 1, 200 sq. ft. 24 VDC

Replaced by CI-300

Features

Specifications

Resources

Cutsheet

Instruction Sheet

CAD Drawings

Specifications

Case Studies

Reviews

Questions & Answers

I have a ci 200 series installed in some massage rooms. They are at max setting of 30 minutes and the lights are coming on halfway through a 1 hour session. Is there a solution for this?

If I set the dip switch 6 to on/enable override, Does the sensor still do auto off or will the sensor be manual on/manual off?

Lights cycle on and off , been install for 10 years , just start this issue, power supply BZ-50 or sensor CI-205 problem? Are sensor W-500A and W-1000A obsolete ? if so what Replacement recommend ?

I would like to completely disable the sensor. How can I do this?