adorne® Motion Sensor Switch, Manual On/Auto Off, Graphite, with Microban®
Bazaarvoice SAP Hybris Integration Version 2.8.1
$53.95 USD
From bedrooms to basements, this motion sensor switch is perfect for anywhere you might want to worry (or waste electricity) less. A conveniently modern light switch, it features combination control that allows you to manually turn lights on when entering a room, and then automatically turns the lights off for you when you leave. Use this device on its own to control a light or fixture from a single location one location, or combine with additional switches for controlling a single light source from multiple locations in 3 or 4-way applications.
This switch* features enduring Microban® antimicrobial technology that works to reduce the growth of bacteria, around the clock, for the lifespan of the product.
* Existing inventory of switches, dimmers and plastic wall plates from the adorne® Collection at some partner locations may not yet include Microban® protection. To confirm that a specific Legrand product is protected with Microban®, check that the exterior of the product packaging includes a green dot or a "Protected with Microban" label.
Made exclusively for use with screwless Wall Plates from the adorne® Collection, sold separately.
No antimicrobial efficacy claims are being made or are valid with respect to products sold in Canada.
- Send
- Save as PDF
-
Added to Favorites Go to favoritesRemove from favorites?Something went wrong. Please try again later.
Features
- Helps fight the growth of stain and odor-causing bacteria through the invisible and continuous product protection of Microban® antimicrobial technology
- For complete installation, device must be paired with an adorne® screwless Wall Plate (not included). Available in a range of contemporary colors and stunning finishes.
- Installs in 15 minutes or less, fitting into an existing electrical box. No new wiring required for typical installation.
- Uses SensaSwitch technology to automatically turn lights off after you leave. (Auto shut-off can be set from 5 to 30 minutes after vacancy.)
- Usable in single-pole or 3-way applications. Must be paired with another SensaSwitch or SensaDimmer for 3-way control.
- More color options available to fit any style, including finishes to match current hardware and lighting trends.
Specifications
Product Line | Pass & Seymour | ||
Color | Graphite | ||
Finish | Metallic | ||
UPC Number | 785007234800 | ||
Country Of Origin | China | ||
Features | Antimicrobial Protection, Motion Sensor | ||
Switch Type | Motion Sensor | ||
Number of Switches | 1 | ||
Device Front Face Size | Full-Size | ||
Device Backbody Size | Plus-Size | ||
Application Sector | Residential | ||
Warranty Type | Limited Lifetime Warranty |
Product Width US | 1.77 in | ||
Product Depth US | 1.85 in | ||
Product Height US | 2.66 in |
Connection | Screw Terminals | ||
Sensor Type | Vacancy | ||
Number of Gangs | 1 | ||
Number of Poles | 3-Way, Single Pole | ||
Wire Size | #14 - #10 AWG | ||
Mounting Type | Box | ||
Connection Type | Internal Pressure Plates |
Resources
Cutsheet
Installation Instructions
CAD Drawings
Supporting Document
Sell Sheet
Customer CAD PDF
Reviews
Bazaarvoice SAP Hybris Integration Version 2.8.1
Questions & Answers
Can you temporarily disable the auto off if light is needed to stay on? Sometimes I need the auto off disabled to have light remain on as Im climbing down an attic ladder that’s inside closet with this switch.
Can the sensa switch (Motion Sensor) be used to control a low voltage relay, that controls a 120 volt fan?
I have a ASVS12 with a blue & white “signal wire” attached and coming out of the back and a ground wire coming off the bottom. The instructions show only a ground wire coming out of a hole. How are these wired?
Can I use the adorne® Motion Sensor Switch Manual On/Auto Off, Magnesium for the Vent alone instead of the light? How about the heater in the bathroom as well?
The regular 4-way switch from Adorne has 02 terminals ("IN") and 02 terminals ("OUT"), while the ASVS12W4 has four terminals ("03-WAY", "HOT", "WHITE", "1-POLE"). How do I use one of the ASVS12W4 to work in a 4-Way installation?
In a 4-way installation, how do I make a ASVS12W4 work as a 4-way switch considering that the regular 4-way switch ASPD2042G4 has 02 terminals "IN" and 02 terminals "OUT" while the ASVS12W4 has 1 terminal "3-WAY", 1 "WHITE", 1 "HOT" and 1 "1-POLE"?
Can the sensitivity of the motion sensor be adjusted?
Can it be turned off manually?
Bazaarvoice SAP Hybris Integration Version 2.8.1