text.skipToContent text.skipToNavigation

20A 250V Heavy Duty Spec-Grade Single Receptacle, Side Wire, Brown

5851 Pass and Seymour

Heavy-Duty Spec Grade Single Receptacle, Side Wire 20A 250V

Color Brown

Send
Save as PDF
Added to Favorites Go to favorites

Remove from favorites?

Something went wrong. Please try again later.

Features

Auto-ground clip assures positive ground.
One-piece brass, triple-wipe power contacts for lasting retention.
Heavy-duty, corrosion-resistant zinc-plated steel strap for added strength.
Backed-out tr-drive steel terminal screws. Internal screw-pressure-plate back and side wire capability. Two back wire holes for increased wiring flexibility.
One-piece brass triple-wire power contacts for lasting retention.
For covering patents, see www.legrand.us/patents.
Temperature Rise: Maximum 30°C temperature rise at full-rated current after 50 cycles of overload at 150% of rated current with direct current. Operating Temperature: Maximum continuous +60°C, minimum -40°C without impact

Specifications

General Info

Product Line	Pass & Seymour
Color	Brown
UPC Number	785007585100
Country Of Origin	Mexico
Number of Receptacles	1
Application Sector	Commercial
Standard	UL498, CSA C22.2 No. 42
Warranty Type	1-Year Limited Warranty
Type	Outlet

Dimensions

Product Width US	1.38 in
Product Depth US	1.08 in

Listing Agencies / 3rd Party Agencies

cULus ListingNumber	140596
cULus Listed	Yes

Technical Information

Dielectric Strength	Withstands 2000V minimum
Connection	Back and side wire
Number of Wires	3
Temperature Rating	-40° - 60° C
Amperage	20 A
Number of Poles	Double Pole
Wire Size	14 - 10 AWG
Indoor/Outdoor	Indoor
Environmental Conditions	Flammability: UL94 V2

Resources

Cutsheet

SF20173-Spec Grade Single

pdf

Reviews

Questions & Answers

Where do I connect the white wire

Asked by: Gregg

Hello Gregg, The 5851W requires two hots and ground to complete the installation. Please feel free to give us a call if you need further assistance. Pass & Seymour Technical Support: Phone:18449573783 Mon - Fri: 8am - 6pm EST (excluding holidays) Best Regards, Technical Support

Answered by: Justin

Date published: 2024-07-29

How to Install this receptacle

Asked by: Abeher

Good Morning, Turn off your power at the breaker, wrap your 2 hots (as this is a 250V device) and your ground around the appropriate screws, tighten them down, and screw the device and your wall plate to the electrical box. If you are uncomfortable with electrical wiring or unsure of what to do, you may want to contact an electrician for further installation assistance. Hope this helps!

Answered by: Tech Support

Date published: 2024-07-03