20A 250V Heavy Duty Spec-Grade Single Receptacle, Side Wire, Light Almond
5851LA
Pass and Seymour
Bazaarvoice SAP Hybris Integration Version 2.8.1
Heavy-Duty Spec Grade Single Receptacle, Side Wire 20A 250V
- Send
- Save as PDF
-
Added to Favorites Go to favoritesRemove from favorites?Something went wrong. Please try again later.
Features
- Auto-ground clip assures positive ground.
- One-piece brass, triple-wipe power contacts for lasting retention.
- Heavy-duty, corrosion-resistant zinc-plated steel strap for added strength.
- Backed-out tr-drive steel terminal screws. Internal screw-pressure-plate back and side wire capability. Two back wire holes for increased wiring flexibility.
- One-piece brass triple-wire power contacts for lasting retention.
- For covering patents, see www.legrand.us/patents.
- Temperature Rise: Maximum 30°C temperature rise at full-rated current after 50 cycles of overload at 150% of rated current with direct current. Operating Temperature: Maximum continuous +60°C, minimum -40°C without impact
Specifications
General Info
| Product Line | Pass & Seymour | ||
| UPC Number | 785007585131 | ||
| Country Of Origin | Mexico | ||
| Number of Receptacles | 1 | ||
| Application Sector | Commercial | ||
| Standard | UL498, CSA C22.2 No. 42 | ||
| Warranty Type | 1-Year Limited Warranty | ||
| Type | Outlet |
Dimensions
| Product Width US | 1.38 in | ||
| Product Depth US | 1.08 in |
Listing Agencies / 3rd Party Agencies
| cULus ListingNumber | 140596 | ||
| cULus Listed | Yes |
Technical Information
| Dielectric Strength | Withstands 2000V minimum | ||
| Connection | Back and side wire | ||
| Number of Wires | 3 | ||
| Temperature Rating | -40° - 60° C | ||
| Amperage | 20 A | ||
| Number of Poles | Double Pole | ||
| Wire Size | 14 - 10 AWG | ||
| Indoor/Outdoor | Indoor | ||
| Environmental Conditions | Flammability: UL94 V2 |
Resources
Cutsheet
Specifications
Supporting Document
Reviews
Bazaarvoice SAP Hybris Integration Version 2.8.1
Questions & Answers
Where do I connect the white wire
Hello Gregg,
The 5851W requires two hots and ground to complete the installation.
Please feel free to give us a call if you need further assistance.
Pass & Seymour Technical Support:
Phone:18449573783
Mon - Fri: 8am - 6pm EST (excluding holidays)
Best Regards,
Technical Support
Date published: 2024-07-29
How to Install this receptacle
Good Morning,
Turn off your power at the breaker, wrap your 2 hots (as this is a 250V device) and your ground around the appropriate screws, tighten them down, and screw the device and your wall plate to the electrical box.
If you are uncomfortable with electrical wiring or unsure of what to do, you may want to contact an electrician for further installation assistance.
Hope this helps!
Date published: 2024-07-03
Bazaarvoice SAP Hybris Integration Version 2.8.1