text.skipToContent text.skipToNavigation

CORE acclAIM Trunk, Plenum, 96 Fiber, OM4, AIM-AIM, 30 Meters

acclAIM has redefined fiber architecture. Replacing cassette-based solutions with direct connections, providing one-to-one cassette functionality, design, and administration⎼without the cassette, eliminating extra components and cost. acclAIM delivers the lowest insertion loss available on the market, the most optical headroom, improved density, flexibility and system lifecycle. The acclAIM™ Alignment Independent Multifiber (AIM) fiber interconnect system is designed to mate multiples of 8-fiber trunk cable connectors directly to arrays of duplex VSFF patch cord connectors by means of a ““conversion adapter,”” or by mating two acclAIM connectors together when breakout is not required. This Multimode 96 Fiber pre-terminated trunk assembly can work within nearly any fiber base architecture, with up to 47% faster install. acclAIM allows you to reimagine network infrastructure.

Fiber Type OM4

Length 30 m

30 m

Send
Save as PDF
Added to Favorites Go to favorites

Remove from favorites?

Something went wrong. Please try again later.

Specifications

General Info

Color	Aqua
Type	Fiber Cable
Application Sector	Commercial
Product Line	Ortronics
Country Of Origin	United States
Construction	Micro Array
Boot Color	Black
Warranty Type	5-Year

Dimensions

Product Length US	30.0 m
Product Weight US	9.9 lb

Listing Agencies / 3rd Party Agencies

CE Certified	Yes
REACH Compliant	Yes

Additional Information

RoHS Compliant

Yes

This product meets the material restrictions of Article 4 of the RoHS Directive (2011/65/EU), including Commission Delegated Directive 2015/863.

Technical Information

Cable Diameter	2 mm
Bend Radius	90 mm
Durability	Max IL of 0.3 dB at 200 cycles per TIA-568.3-E
Fiber Optic Cable Type	OM4
Number of Fanout Cables	12
Number of Fibers	96

Resources

Cutsheet

DPC_OR_CAMAMC630JEMMY030M Cutsheet

pdf

Customer Drawing No.

Customer drawing for CORE acclAIM Trunk, Plenum, 96 Fiber, OM4, AIM-AIM

pdf

can this dim 0-10 volt drivers or is it just adjusting sensor to preset hi and low trim levels. I need to be able to dim from 100 down to about 5% if needed.

Asked by: mike

Hello, The FS-205 occupancy sensors turn lighting ON and OFF based on occupancy and ambient light levels. It does not have continues dimming

Answered by: Justin

Date published: 2025-01-03

can I wire these together so that when one area comes on they all come on. I have 3 currently servicing a barber shop. when 1 area comes on I want them all to come on, Is this possible with the DT 305? If so how?

Asked by: Steven Schmelz

Hello, It sounds like we have three separate power packs, we can use one power packs red/blue/black and the other two packs we will cap the red 24v off and in parallel connect the blues and blacks.

Answered by: Justin

Date published: 2024-11-04

Are these occupancy sensors exterior rated? If not, what occupancy sensors are?

Asked by: Enrica Cotellessa

The Wattstopper CI-305 is not exterior rated. For outdoor applications, I recommend looking into the FSP line of sensors, which are designed for outdoor use.

Answered by: Tier 1 Tech Support

Date published: 2024-10-24

Will this plug work with the 3769 Corrosion-Resistant Receptacle?

Asked by: Ryan

Thank you for your inquiry. Please review the following recommendation for the correct receptacle for plug part number CS8165: Part #: CS8169 - 3 phase 480V California Standard Receptacle

Answered by: Justin

Date published: 2024-06-28

Has this item been discontinued?

Asked by: David

Hello David, I have checked our inventory, and discontinued list. The DT-305 is not an obsolete item, and is available

Answered by: Justin

Date published: 2024-08-22

I have 3 occupancy sensors that do seem to shut off the lights when unoccupied. I see the red and green light flickering meaning we clearly have power.

Asked by: Serge St Pierre

The red and green are activity LEDs for the sensors, if the LEDs continue to flash when you stand still, then the sensor is likely false tripping. I suggest to start with placement, assure all sensors are 5-6' away from air supplies this is common to false trip the sensors causing lights to either stay ON or OFF. If more assistance is needed, please call our Technical Support Team 1-800-879-8585

Answered by: Justin

Date published: 2024-03-28

What is the IP rating of DT-#100 series?

Asked by: Anonymous

We do not have a DT-100 sensor, if your question concerns the DT-305, this device is specified for indoor use only and does not have an IP rating.

Answered by: Justin

Date published: 2024-01-31

I have CI-305 sensors in an office space. The lights in this office space go out every 30 minutes (assuming that no one moves from their desks in that time). Is there an option to change the timer from 30 minutes to a longer period of time?

Asked by: Chris

Hello, The CI-305 will have the following time delay settings - Time Delay Adjustment 30 seconds to 30 minutes. Best Regards, Technical Support

Answered by: Justin

Date published: 2023-10-18

CORE acclAIM Trunk, Plenum, 96 Fiber, OM4, AIM-AIM, 30 Meters Questions - page 2

CORE acclAIM Trunk, Plenum, 96 Fiber, OM4, AIM-AIM, 30 Meters

Specifications

Resources

Cutsheet

Customer Drawing No.

Reviews

Questions & Answers

can this dim 0-10 volt drivers or is it just adjusting sensor to preset hi and low trim levels. I need to be able to dim from 100 down to about 5% if needed.

can I wire these together so that when one area comes on they all come on. I have 3 currently servicing a barber shop. when 1 area comes on I want them all to come on, Is this possible with the DT 305? If so how?

Are these occupancy sensors exterior rated? If not, what occupancy sensors are?

Will this plug work with the 3769 Corrosion-Resistant Receptacle?

Has this item been discontinued?

I have 3 occupancy sensors that do seem to shut off the lights when unoccupied. I see the red and green light flickering meaning we clearly have power.

What is the IP rating of DT-#100 series?

I have CI-305 sensors in an office space. The lights in this office space go out every 30 minutes (assuming that no one moves from their desks in that time). Is there an option to change the timer from 30 minutes to a longer period of time?

CORE acclAIM Trunk, Plenum, 96 Fiber, OM4, AIM-AIM, 30 Meters

Specifications

Resources

Cutsheet

Customer Drawing No.

Related Products

Reviews

Questions & Answers

can this dim 0-10 volt drivers or is it just adjusting sensor to preset hi and low trim levels. I need to be able to dim from 100 down to about 5% if needed.

can I wire these together so that when one area comes on they all come on. I have 3 currently servicing a barber shop. when 1 area comes on I want them all to come on, Is this possible with the DT 305? If so how?

Are these occupancy sensors exterior rated? If not, what occupancy sensors are?

Will this plug work with the 3769 Corrosion-Resistant Receptacle?

Has this item been discontinued?

I have 3 occupancy sensors that do seem to shut off the lights when unoccupied. I see the red and green light flickering meaning we clearly have power.

What is the IP rating of DT-#100 series?

I have CI-305 sensors in an office space. The lights in this office space go out every 30 minutes (assuming that no one moves from their desks in that time). Is there an option to change the timer from 30 minutes to a longer period of time?